More frame welding stuff

I built the bent frame parts (the overarching parts) and welded them in place. I also added a cross-piece between the front unicycle forks. I welded the rear shelf in place and welded on the backs of the eyes. I used the sheet metal from a junked washing machine. I welded pipe angles behind the eye holes to house the LED's to light up the eyes. I created the pupils by welding a large washer onto a bolt head. I also installed mounting points for the seats.

By the 26th I had the basics of the whole frame done.

Four days later I added the shelf on the back and the backs of the eyes.